The Real 3D Modelling Test

• 1. Pipe Branch
• 2. LEGO Plane
• 3. Earthenware Vase
• 4. X Block
• 5. Jet Engine Exhaust
• 6. Paper Clip
• 7. Pipe Flange
• 8. 3D-Printed Robot Assembly
• 9. Hair-Dryer Air Guide
• 10. Air Shield

1. Pipe Branch

2. LEGO Plane

3. Earthenware Vase

4. X Block

5. Jet Engine Exhaust

6. Paper Clip

7. Pipe Flange

8. 3D-Printed Robot Assembly

Download the file here: [3D-print walking robot.step](3d print walking robot.step)

1. Download the STEP file above.
2. If necessary, use Rigid Group to combine the parts. You do not need to assemble every part with a joint.
3. Assemble the mechanical horse's legs as shown in the animation. Note that the blue crankshafts on the two sides must be 180° apart. (50%)
4. Assemble the legs on the other side so that they are perfectly symmetrical. Do not use the Mirror command, and make sure the complete mechanism can move. (50%)

9. Hair-Dryer Air Guide

10. Air Shield

Translation notice: This English page was generated automatically by AI and has not yet been reviewed by a human. It will be checked and revised page by page when time permits.